[PATCH 0/3] Enable EHCI-platform driver for use with ACPI

On Wed, Aug 12, 2015 at 04:51:27PM -0500, Jeremy Linton wrote:

This patch set enables the USB on the ARM Juno development platform
when using an ACPI kernel. This patch is in two primary parts. First
It tweaks the code in acpi_check_dma() to support the recently added
CCA attribute which describes a device which is not cache coherent.

It then adds an error message if the device cannot be configured with
the current DMA settings, finally it adds the ACPI PNP id to the
acpi_match_table entry.

Patch 1 I am unsure of (I just don't know enough about DMA), but for the other
two it looks fine to me.

Reviewed-by: Graeme Gregory <redacted>

Jeremy Linton (3):
  Honor ACPI _CCA attribute setting
  Display a DMA error message
  Add ACPI bindings for the EHCI platform driver.

 drivers/usb/host/ehci-platform.c | 13 ++++++++++++-
 include/acpi/acpi_bus.h          |  5 +++--
 2 files changed, 15 insertions(+), 3 deletions(-)

-- 
2.4.3


--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html