@@ -0,0 +1,70 @@
+= EEPROM Data Device Tree Bindings =
+
+This binding is intended to represent the location of hardware
+configuration data stored in EEPROMs.
+
+On a significant proportion of boards, the manufacturer has stored
+some data on an EEPROM-like device, for the OS to be able to retrieve
+these information and act upon it. Obviously, the OS has to know
+about where to retrieve these data from, and where they are stored on
+the storage device.
+
+This document is here to document this.
+
+= Data providers =
+Contains bindings specific to provider drivers and data cells as children
+to this node.
+
+= Data cells =
+These are the child nodes of the provider which contain data cell
+information like offset and size in eeprom provider.
+
+Required properties:
+reg:	specifies the offset in byte within that storage device, and the length
+	in bytes of the data we care about.
+	There could be more then one offset-length pairs in this property.
+
+Optional properties:
+As required by specific data parsers/interpreters.
+
+For example:
+
+	/* Provider */
+	qfprom: qfprom at 00700000 {
+		compatible 	= "qcom,qfprom";
+		reg		= <0x00700000 0x1000>;
+		...
+
+		/* Data cells */
+		tsens_calibration: calib at 404 {
+			reg = <0x404 0x10>;
+		};
+
+		serial_number: sn {
+			reg = <0x104 0x4>, <0x204 0x4>, <0x30c 0x4>;
+
+		};
+		...
+	};
+
+= Data consumers =
+Are device nodes which consume eeprom data cells.
+
+Required properties:
+
+eeproms: List of phandle and data cell the device might be interested in.
+
+Optional properties:
+
+eeprom-names: List of data cell name strings sorted in the same order
+	      as the eeproms property. Consumers drivers will use
+	      eeprom-names to differentiate between multiple cells,
+	      and hence being able to know what these cells are for.
+
+For example:
+
+	tsens {
+		...
+		eeproms = <&tsens_calibration>;
+		eeprom-names = "calibration";
+	};