[PATCH V2 RESEND] clk: mxs: Fix invalid 32-bit access to frac registers

Hi Stefan,

On Tue, Feb 10, 2015 at 7:24 PM, Stefan Wahren [off-list ref] wrote:

thanks this is very helpful. I built the linux-next for my Duckbill and add the
SSP2 section from imx28-evk.dts into imx28-duckbill.dts.

Without my patch i get the following for HW_CLKCTRL_FRAC0:

./memwatch -a 0x800401B0

0x800401b0: 0x5e5b5513

With my patch i get:

./memwatch -a 0x800401B0

0x800401b0: 0x5e1b5513

So it looks like a problem in my patch.

Yes, let's try to get the same value HW_CLKCTRL_FRAC0.

I orded such a flash chip, but it will take some time until i can use it with my
hardware.

Thanks for doing this.

Maybe if you find out a way to fix the calculation of
HW_CLKCTRL_FRAC0, then I can test it on my board.

Regards,

Fabio Estevam