On Tue, Jul 15, 2014 at 12:20:02PM +0200, Laurent Pinchart wrote:

Hi Boris,

On Tuesday 15 July 2014 12:06:19 Boris BREZILLON wrote:

quoted

On Mon, 14 Jul 2014 12:05:43 +0200 Thierry Reding wrote:

quoted

On Mon, Jul 07, 2014 at 06:42:59PM +0200, Boris BREZILLON wrote:

quoted

The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e.
at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display
controller device.

The HLCDC block provides a single RGB output port, and only supports LCD
panels connection to LCD panels for now.

The atmel,panel property link the HLCDC RGB output with the LCD panel
connected on this port (note that the HLCDC RGB connector implementation
makes use of the DRM panel framework).

Connection to other external devices (DRM bridges) might be added later
by mean of a new atmel,xxx (atmel,bridge) property.

Signed-off-by: Boris BREZILLON <redacted>
---

 .../devicetree/bindings/drm/atmel-hlcdc-dc.txt     | 59 +++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644
 Documentation/devicetree/bindings/drm/atmel-hlcdc-dc.txt

[snip]

quoted

quoted

quoted

+ - atmel,panel: Should contain a phandle with 2 parameters.
+   The first cell is a phandle to a DRM panel device
+   The second cell encodes the RGB mode, which can take the following
values: +   * 0: RGB444
+   * 1: RGB565
+   * 2: RGB666
+   * 3: RGB888

These are properties of the panel and should be obtained from the panel
directly rather than an additional cell in this specifier.

Okay.
What's the preferred way of doing this ?
What about defining an rgb-mode property in the panel node.

You could do that, but it won't help you much, as the HLCDC driver must not 
parse properties from the panel node. You should instead extend the drm_panel 
API with a function to retrieve panel properties. The HLCDC driver will then 
query the panel driver at runtime for the interface type. The panel driver 
will get the information from hardcoded data in the driver, from DT or 
possibly in some cases by querying the panel hardware directly.

My preference for this would be that we either add this to some existing
structure (struct drm_display_info seems like a good candidate) or if
the number of parameters grows out of hands, then maybe even introduce a
new type of device that's specific for the interface. DRM panels are an
abstraction for panels, that is, interface-agnostic, and if we start
exposing interface specific parameters things will start to become very
unwieldy.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140715/4a4ecd4a/attachment-0001.sig>