[PATCH v5 14/14] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi
From: Tushar Behera <hidden>
Date: 2014-07-02 09:20:35
Also in:
linux-devicetree, linux-samsung-soc, lkml
On 06/26/2014 11:45 PM, Javier Martinez Canillas wrote:
Peach pit and pi boards uses a Maxim 77802 power management IC to drive regulators and its Real Time Clock. This patch adds support for this chip. These are the device nodes and pinctrl configuration that are present on the Peach pit DeviceTree source file in the the Chrome OS kernel 3.8 tree. Signed-off-by: Javier Martinez Canillas <redacted> Tested-by: Naveen Krishna Chatradhi <redacted> ---
[ ... ]
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ };IMO, adding a blank line between sub-nodes would be better.
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm_real";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ };[ ... ]
+ vqmmc_sdcard: ldo4_reg: LDO4 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+Blank line, can be removed.
+ };
[ ... ]
+ ldo23_reg: LDO23 {
+ regulator-name = "ld0_23";ldo_23, 'o' in place of '0'. Similar comments for peach-pi DTS file. -- Tushar Behera