The BG2Q has an AHCI SATA controller with an eSATA interface. Enable it.
Also use the SATA PHY 0, the BG2Q DMP does not has the SATA PHY 1.

Signed-off-by: Antoine T?nart <redacted>
---
 arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 2da9c41e29d8..e5c9012babc6 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts

@@ -26,3 +26,13 @@
 &uart0 {
 	status = "okay";
 };
+
+&ahci {
+	phys = <&sata_phy0>;
+	phy-names = "port0";
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};

-- 
1.9.1