[PATCH v3 5/6] ARM: berlin: add the AHCI node for the BG2Q
From: Antoine Ténart <hidden>
Date: 2014-05-14 09:49:26
Also in:
linux-devicetree, linux-ide, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The BG2Q has an AHCI SATA controller. Add the corresponding nodes (AHCI, SATA PHYs) in its device tree. Signed-off-by: Antoine T?nart <redacted> --- arch/arm/boot/dts/berlin2q.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 07452a7483fa..53f8d9763589 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi@@ -183,6 +183,31 @@ }; }; + ahci: sata at e90000 { + compatible = "marvell,berlin-ahci"; + reg = <0xe90000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sata_phy: phy at e900a0 { + compatible = "marvell,berlin-sata-phy"; + reg = <0xe900a0 0x10>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: phy at 0 { + #phy-cells = <0>; + reg = <0>; + }; + + sata_phy1: phy at 1 { + #phy-cells = <0>; + reg = <1>; + }; + }; + apb at fc0000 { compatible = "simple-bus"; #address-cells = <1>;
--
1.9.1