On Mon, Jan 20, 2014 at 04:47:34PM -0200, Fabio Estevam wrote:

On Mon, Jan 20, 2014 at 3:16 PM, Russell King - ARM Linux
[off-list ref] wrote:

quoted

Not as far as I can see.  fixed-clock appears to have two properies:

        clock-frequency
        clock-output-names

and nothing else.  See of_fixed_clk_setup in drivers/clk/clk-fixed-rate.c.
You'll also find that the documentation in this file says this about it:

Looks like Documentation/devicetree/bindings/clock/fixed-clock.txt is
misleading then:

"Optional properties:
- gpios : From common gpio binding; gpio connection to clock enable pin."

It seems so.  It appears that the binding was added to clk-fixed-rate.c
here:

commit 015ba40246497ae02a5f644d4c8adfec76d9b75c
Date:   Sat Apr 7 21:39:39 2012 -0500

and the binding documentation separately:

commit 766e6a4ec602d0c107553b91b3434fe9c03474f4
Date:   Mon Apr 9 14:50:06 2012 -0500

From what I can see, this "gpios" property has never been supported.

-- 
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up.  Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".