[PATCH 09/24] ARM: ixp4xx: use __iomem pointers for MMIO
From: arnd@arndb.de (Arnd Bergmann)
Date: 2012-09-14 21:36:48
Also in:
lkml
Subsystem:
arm port, arm/intel ixp4xx arm architecture, the rest · Maintainers:
Russell King, Linus Walleij, Imre Kaloz, Linus Torvalds
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. At the moment, this patch conflicts with other patches in linux-next, need to sort this out. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/mach-ixp4xx/common.c | 2 +- arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 8c9cd5d..fdf91a1 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c@@ -70,7 +70,7 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { }, #ifdef CONFIG_DEBUG_LL { /* Debug UART mapping */ - .virtual = IXP4XX_DEBUG_UART_BASE_VIRT, + .virtual = (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT, .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), .length = IXP4XX_DEBUG_UART_REGION_SIZE, .type = MT_DEVICE
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index 2272f5a..eb68b61 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h@@ -49,21 +49,21 @@ * Expansion BUS Configuration registers */ #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) +#define IXP4XX_EXP_CFG_BASE_VIRT IOMEM(0xFFBFE000) #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) /* * PCI Config registers */ #define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFF000) +#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFFBFF000) #define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) /* * Peripheral space */ #define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBEB000) +#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFFBEB000) #define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) /*
@@ -73,7 +73,7 @@ * aligned so that it * can be used with the low-level debug code. */ #define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) -#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000) +#define IXP4XX_DEBUG_UART_BASE_VIRT IOMEM(0xffb00000) #define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) #define IXP4XX_EXP_CS0_OFFSET 0x00
--
1.7.10