On Mon, Feb 05, 2018 at 10:25:27PM -0600, Alan Tull wrote:

On Mon, Feb 5, 2018 at 8:17 PM, Wu Hao [off-list ref] wrote:

quoted

On Mon, Feb 05, 2018 at 11:21:52AM -0600, Alan Tull wrote:

quoted

On Sun, Feb 4, 2018 at 4:05 AM, Wu Hao [off-list ref] wrote:

quoted

On Sat, Feb 03, 2018 at 11:41:24AM +0100, Moritz Fischer wrote:

quoted

Hi Hao,

On Fri, Feb 02, 2018 at 04:26:26PM -0800, Luebbers, Enno wrote:

quoted

Hi Hao, Alan,

On Fri, Feb 02, 2018 at 05:42:13PM +0800, Wu Hao wrote:

quoted

On Thu, Feb 01, 2018 at 04:00:36PM -0600, Alan Tull wrote:

quoted

On Mon, Nov 27, 2017 at 12:42 AM, Wu Hao [off-list ref] wrote:

Hi Hao,

A few comments below.   Besides that, looks good.

quoted

This patch adds fpga manager driver for FPGA Management Engine (FME). It
implements fpga_manager_ops for FPGA Partial Reconfiguration function.

Signed-off-by: Tim Whisonant <redacted>
Signed-off-by: Enno Luebbers <redacted>
Signed-off-by: Shiva Rao <redacted>
Signed-off-by: Christopher Rauer <redacted>
Signed-off-by: Kang Luwei <redacted>
Signed-off-by: Xiao Guangrong <guangrong.xiao-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Signed-off-by: Wu Hao <redacted>
----
v3: rename driver to dfl-fpga-fme-mgr
    implemented status callback for fpga manager
    rebased due to fpga api changes
---
 .../ABI/testing/sysfs-platform-fpga-dfl-fme-mgr    |   8 +
 drivers/fpga/Kconfig                               |   6 +
 drivers/fpga/Makefile                              |   1 +
 drivers/fpga/fpga-dfl-fme-mgr.c                    | 318 +++++++++++++++++++++
 drivers/fpga/fpga-dfl.h                            |  39 ++-
 5 files changed, 371 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/ABI/testing/sysfs-platform-fpga-dfl-fme-mgr
 create mode 100644 drivers/fpga/fpga-dfl-fme-mgr.c

diff --git a/Documentation/ABI/testing/sysfs-platform-fpga-dfl-fme-mgr b/Documentation/ABI/testing/sysfs-platform-fpga-dfl-fme-mgr
new file mode 100644
index 0000000..2d4f917
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-fpga-dfl-fme-mgr

@@ -0,0 +1,8 @@
+What:          /sys/bus/platform/devices/fpga-dfl-fme-mgr.0/interface_id
+Date:          November 2017
+KernelVersion:  4.15
+Contact:       Wu Hao <hao.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
+Description:   Read-only. It returns interface id of partial reconfiguration
+               hardware. Userspace could use this information to check if
+               current hardware is compatible with given image before FPGA
+               programming.

I'm a little confused by this.  I can understand that the PR bitstream
has a dependency on the FPGA's static image, but I don't understand
the dependency of the bistream on the hardware that is used to program
the bitstream to the FPGA.

Sorry for the confusion, the interface_id is used to indicate the version of
the hardware for partial reconfiguration (it's part of the static image of
the FPGA device). Will improve the description on this.

I'm not sure userland should be making the call on whether what you're
trying to load is compatible or not.

Could you explain more about what your concern was about this (unless
Hao has covered it below)?

It makes sense to me in this use case at least since userspace has a
pile of images and is choosing which one to load.

quoted

quoted

Isn't there a way to check this in
your PR reconfiguration handler in-kernel?

Hi Moritz

Actually with current driver interface, doing a partial reconfiguration with an
incompatible image, then driver will report PR failure with error code
FPGA_MGR_STATUS_INCOMPATIBLE_IMAGE_ERR as hardware checks it, but anyway user
needs to know hardware interface_id information to find or re-generated correct
images. I think it's more flexible to leave it to userspace on using this
information exposed by driver. : )

Thanks
Hao

quoted

quoted

quoted

The interface_id expresses the compatibility of the static region with PR
bitstreams generated for it. It changes every time a new static region is
generated.

In the near future the DFL framework will be used with SoC's that have
a hard FPGA PR manager (that's not part of the static region).  The
hard FPGA manager driver won't know anything about the static region.

quoted

quoted

quoted

Would it make more sense to have the interface_id exposed as part of the FME
device (which represents the static region)? I'm not sure - it kind of also
makes sense here, where you would have all the information in one place (if the
interface_id matches, I can use this component to program a bitstream).

According to the intel-fpga.txt document, the identifier for the
static image is at

/sys/class/fpga_region/regionX/fpga-dfl-fme.n/bitstream_id

Hi Alan

Hi Hao,

quoted

This bitstream_id refects the full static region version. As you know, PR is
only a sub feature of the FME functional unit, it's possible that we have
different static region (different bitstream_id) but it has the exact same
PR sub feature under the FME, only changes on other sub features or function
units.

OK, thanks for that explanation.  That makes sense but could have
easily been different.  Please document this somewhere.

Sure, will do.

Thanks
Hao