Thread (13 messages) 13 messages, 3 authors, 7d ago

Re: [PATCH net-next v16 0/7] net: stmmac: qcom-ethqos: add support for SCMI power domains

flat view

From: patchwork-bot+netdevbpf@kernel.org
Date: 2026-10-21 02:20:11
Also in: imx, linux-amlogic, linux-arm-msm, linux-devicetree, linux-mips, linux-renesas-soc, linux-riscv, linux-rockchip, linux-sunxi, lkml

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski [off-list ref]:

On Wed, 14 Oct 2026 14:36:39 +0200 you wrote:
Add support for the firmware-managed variant of the DesignWare MAC on
the sa8255p platform. This series contains new DT bindings and driver
changes required to support the MAC in the STMMAC driver.

It also reorganizes the ethqos code quite a bit to make the introduction
of power domains into the driver a bit easier on the eye.

[...]
Here is the summary with links:
  - [net-next,v16,1/7] net: stmmac: dwmac4: don't program the 1us tick counter without a CSR clock
    https://git.kernel.org/netdev/net-next/c/d09d7b8e86e5
  - [net-next,v16,2/7] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
    https://git.kernel.org/netdev/net-next/c/534198a05d92
  - [net-next,v16,3/7] net: stmmac: qcom-ethqos: set serdes mode before powerup
    https://git.kernel.org/netdev/net-next/c/7af44cb9e447
  - [net-next,v16,4/7] net: stmmac: qcom-ethqos: update phy_mode to the resolved interface in mac_finish()
    https://git.kernel.org/netdev/net-next/c/05b3ea7346e3
  - [net-next,v16,5/7] net: stmmac: qcom-ethqos: reuse the address of ethqos_emac_driver_data
    https://git.kernel.org/netdev/net-next/c/92719abd6378
  - [net-next,v16,6/7] net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function
    https://git.kernel.org/netdev/net-next/c/acf1e3db9151
  - [net-next,v16,7/7] net: stmmac: qcom-ethqos: add support for sa8255p
    https://git.kernel.org/netdev/net-next/c/bb3183e1c938

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help