Re: [PATCH PRELIMINARY 5/5] arm64: dts: qcom: shikra-iqs-evk: enable both Ethernet ports
From: Konrad Dybcio <hidden>
Date: 2026-09-23 13:02:00
Also in:
linux-arm-msm, linux-devicetree, lkml
On 9/8/26 8:23 AM, Mohd Ayaan Anwar wrote:
Enable ethernet0 and ethernet1 on the IQS EVK with their respective TI DP83867 RGMII PHYs. Both PHYs are powered by GPIO-controlled 2.5V regulators. Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com> ---
[...]
+&tlmm {
+ rgmii_phy0_pwr_default: rgmii-phy0-pwr-default-state {
+ pins = "gpio66";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ rgmii_phy1_pwr_default: rgmii-phy1-pwr-default-state {
+ pins = "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };and in both places here Reviewed-by: Konrad Dybcio <redacted> Konrad