@@ -141,6 +141,10 @@
 #define RTL8211F_PHYSICAL_ADDR_WORD1		17
 #define RTL8211F_PHYSICAL_ADDR_WORD2		18
 
+#define RTL8261X_EXT_ADDR_REG			0xa436
+#define RTL8261X_EXT_DATA_REG			0xa438
+#define RTL_8261X_SUB_PHY_ID_ADDR		0x801d
+
 #define RTL822X_VND1_SERDES_OPTION			0x697a
 #define RTL822X_VND1_SERDES_OPTION_MODE_MASK		GENMASK(5, 0)
 #define RTL822X_VND1_SERDES_OPTION_MODE_2500BASEX_SGMII		0

@@ -251,6 +255,32 @@
 #define RTL_8221B_VM_CG				0x001cc84a
 #define RTL_8251B				0x001cc862
 #define RTL_8261C				0x001cc890
+#define RTL_8261C_CG				0x001cc898
+
+#define RTL8261C_CE_MODEL		0x00
+#define RTL8261X_IMR			0xa4d2
+#define RTL8261X_ISR			0xa4d4
+#define RTL8261X_INT_AUTONEG_ERROR	BIT(0)
+#define RTL8261X_INT_PAGE_RECV		BIT(2)
+#define RTL8261X_INT_AUTONEG_DONE	BIT(3)
+#define RTL8261X_INT_LINK_CHG		BIT(4)
+#define RTL8261X_INT_PHY_REG_ACCESS	BIT(5)
+#define RTL8261X_INT_PME		BIT(7)
+#define RTL8261X_INT_ALDPS_CHG		BIT(9)
+#define RTL8261X_INT_JABBER		BIT(10)
+
+#define RTL8261X_INT_MASK_DEFAULT	(RTL8261X_INT_AUTONEG_DONE | \
+					 RTL8261X_INT_LINK_CHG)
+
+#define RTL8261X_INT_MASK_ALL		(RTL8261X_INT_AUTONEG_ERROR | \
+					 RTL8261X_INT_PAGE_RECV | \
+					 RTL8261X_INT_AUTONEG_DONE | \
+					 RTL8261X_INT_LINK_CHG | \
+					 RTL8261X_INT_PHY_REG_ACCESS | \
+					 RTL8261X_INT_PME | \
+					 RTL8261X_INT_ALDPS_CHG | \
+					 RTL8261X_INT_JABBER)
+
 
 /* RTL8211E and RTL8211F support up to three LEDs */
 #define RTL8211x_LED_COUNT			3

@@ -310,6 +340,129 @@ static int rtl821x_modify_ext_page(struct phy_device *phydev, u16 ext_page,
 	return phy_restore_page(phydev, oldpage, ret);
 }
 
+static int rtl8261x_probe(struct phy_device *phydev)
+{
+	int sub_phy_id, ret;
+
+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, RTL8261X_EXT_ADDR_REG,
+			    RTL_8261X_SUB_PHY_ID_ADDR);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL8261X_EXT_DATA_REG);
+	if (ret < 0)
+		return ret;
+
+	sub_phy_id = (ret >> 8) & 0xff;
+
+	switch (sub_phy_id) {
+	case RTL8261C_CE_MODEL:
+		phydev_info(phydev, "RTL8261C detected (sub_id 0x%02x)\n", sub_phy_id);
+		break;
+
+	default:
+		phydev_err(phydev, "Unknown sub_id 0x%02x\n", sub_phy_id);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int rtl8261x_get_features(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_c45_pma_read_abilities(phydev);
+	if (ret)
+		return ret;
+	/*
+	 * Supplement Multi-Gig speeds that may not be automatically detected
+	 * RTL8261X supports 2.5G/5G in addition to standard 10G
+	 */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			 phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+			 phydev->supported);
+
+	return 0;
+}
+
+static int rtl8261x_config_intr(struct phy_device *phydev)
+{
+	int ret;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL8261X_ISR);
+		if (ret < 0)
+			return ret;
+
+		ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, RTL8261X_IMR,
+				    RTL8261X_INT_MASK_DEFAULT);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, RTL8261X_IMR, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static irqreturn_t rtl8261x_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL8261X_ISR);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & RTL8261X_INT_MASK_ALL))
+		return IRQ_NONE;
+
+	if (irq_status & (RTL8261X_INT_LINK_CHG | RTL8261X_INT_AUTONEG_DONE |
+	    RTL8261X_INT_AUTONEG_ERROR | RTL8261X_INT_JABBER))
+		phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int rtl8261x_config_aneg(struct phy_device *phydev)
+{
+	bool changed = false;
+	u16 adv_1g = 0;
+	int ret;
+
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return genphy_c45_pma_setup_forced(phydev);
+
+	ret = genphy_c45_an_setup_master_slave(phydev);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	ret = genphy_c45_config_aneg(phydev);
+	if (ret < 0)
+		return ret;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			      phydev->advertising))
+		adv_1g = ADVERTISE_1000FULL;
+
+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2,
+				     RTL822X_VND2_C22_REG(MII_CTRL1000),
+				     ADVERTISE_1000FULL, adv_1g);
+	if (ret < 0)
+		return ret;
+	if (ret > 0 || changed)
+		return genphy_c45_restart_aneg(phydev);
+
+	return 0;
+}
+
 static int rtl821x_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;

@@ -3001,6 +3154,18 @@ static struct phy_driver realtek_drvs[] = {
 		.resume		= genphy_resume,
 		.read_mmd	= genphy_read_mmd_unsupported,
 		.write_mmd	= genphy_write_mmd_unsupported,
+	}, {
+		PHY_ID_MATCH_EXACT(RTL_8261C_CG),
+		.name			= "Realtek RTL8261C 10Gbps PHY",
+		.probe			= rtl8261x_probe,
+		.get_features		= rtl8261x_get_features,
+		.config_aneg		= rtl8261x_config_aneg,
+		.read_status		= genphy_c45_read_status,
+		.config_intr		= rtl8261x_config_intr,
+		.handle_interrupt	= rtl8261x_handle_interrupt,
+		.soft_reset		= genphy_c45_soft_reset,
+		.suspend		= genphy_c45_pma_suspend,
+		.resume			= genphy_c45_pma_resume,
 	},
 };