[PATCH net-next 5/5] net: cadence: macb: enable EEE for Raspberry Pi RP1
From: Nicolai Buchwitz <hidden>
Date: 2026-02-23 09:05:26
Subsystem:
atmel macb ethernet driver, networking drivers, the rest · Maintainers:
Théo Lebrun, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Enable IEEE 802.3az Energy Efficient Ethernet on the Raspberry Pi 5's RP1 southbridge by adding MACB_CAPS_EEE to its platform config. The RP1 contains a Cadence GEM_GXL MAC (revision 0x00070109) paired with a Broadcom BCM54213PE PHY, both of which support EEE at 1000BASE-T and 100BASE-TX. Signed-off-by: Nicolai Buchwitz <redacted> --- drivers/net/ethernet/cadence/macb_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 178c0ddc78cd..7377c0f0c040 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c@@ -5536,7 +5536,8 @@ static const struct macb_config eyeq5_config = { static const struct macb_config raspberrypi_rp1_config = { .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG | MACB_CAPS_JUMBO | - MACB_CAPS_GEM_HAS_PTP, + MACB_CAPS_GEM_HAS_PTP | + MACB_CAPS_EEE, .dma_burst_length = 16, .clk_init = macb_clk_init, .init = macb_init,
--
2.39.5