[PATCH net-next v6 5/5] net: cadence: macb: enable EEE for Mobileye EyeQ5
From: Nicolai Buchwitz <hidden>
Date: 2026-03-04 10:55:03
Subsystem:
atmel macb ethernet driver, networking drivers, the rest · Maintainers:
Théo Lebrun, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Set MACB_CAPS_EEE for the Mobileye EyeQ5 GEM instance. EEE has been verified on EyeQ5 hardware using a loopback setup with ethtool --show-eee confirming EEE active on both ends at 100baseT/Full and 1000baseT/Full. Tested-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Nicolai Buchwitz <redacted> --- drivers/net/ethernet/cadence/macb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 5933a5042bc8..3dcae4d5f74c 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c@@ -5526,7 +5526,7 @@ static const struct macb_config versal_config = { static const struct macb_config eyeq5_config = { .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO | MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_QUEUE_DISABLE | - MACB_CAPS_NO_LSO, + MACB_CAPS_NO_LSO | MACB_CAPS_EEE, .dma_burst_length = 16, .clk_init = macb_clk_init, .init = eyeq5_init,
--
2.51.0