RE: [PATCH net-next 0/8] Add support for Renesas RZ/G3L GBETH

Hi Geert,

Thanks for the feedback

-----Original Message-----
From: Geert Uytterhoeven <geert@linux-m68k.org>
Sent: 28 January 2026 18:42
Subject: Re: [PATCH net-next 0/8] Add support for Renesas RZ/G3L GBETH

Hi Biju,

On Wed, 28 Jan 2026 at 13:58, Biju [off-list ref] wrote:

quoted

From: Biju Das <biju.das.jz@bp.renesas.com>

The Renesas RZ/G3L GBETH IP uses Synopsys DesignWare MAC version 5.30
compared to other Renesas SoC such as RZ/V2H that use MAC version 5.20.

The RZ/G3L GBETH requires an extra clock compared to RZ/G3E and has
pps interrupts. Document the Renesas RZ/G3L GBETH IP in bindings and
enable the Gigabit Ethernet Interface (GBETH0) populated on the RZ/G3L
SMARC EVK. The eth1, pincontrol definitions and hotplug support will
be added later.

Biju Das (8):
  dt-bindings: net: renesas,rzv2h-gbeth: Document Renesas RZ/G3L SoC
  net: stmmac: dwmac-renesas-gbeth: Add support for RZ/G3L SoC
  clk: renesas: rzg2l: Drop a check in rzg3s_cpg_pll_clk_recalc_rate()
  clk: renesas: rzg2l: Add support for enabling PLLs
  clk: renesas: r8a08g046: Add support for PLL6 clk
  clk: renesas: r9a08g046: Add clock and reset signals for the GBETH IPs
  arm64: dts: renesas: r9a08g046: Add GBETH nodes
  arm64: dts: renesas: rzg3l-smarc-som: Enable eth0 (GBETH) interface

Thanks for your series!

Please don't include "net-next" tags in patches that are not meant to be applied to the net-next tree.

My bad, I will split net-next patches separate and send it as v2.

Cheers,
Biju