[PATCH net-next 03/15] net: phy: aquantia: reorder AQR113C PMD Global Transmit Disable bit clearing with supported_interfaces

Introduced in commit bed90b06b681 ("net: phy: aquantia: clear PMD Global
Transmit Disable bit during init"), the clearing of MDIO_PMA_TXDIS plus
the call to aqr107_wait_processor_intensive_op() are only by chance
placed between aqr107_config_init() and aqr107_fill_interface_modes().
In other words, aqr107_fill_interface_modes() does not depend in any way
on these 2 operations.

I am only 90% sure of that, and I intend to move aqr107_fill_interface_modes()
to be a part of aqr107_config_init() in the future. So to isolate the
issue for blame attribution purposes, make these 2 functions adjacent to
each other again.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/phy/aquantia/aquantia_main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index b9b58c6ce686..7ac0b685a317 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c

@@ -1093,16 +1093,16 @@ static int aqr113c_config_init(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS,
-				 MDIO_PMD_TXDIS_GLOBAL);
+	ret = aqr107_fill_interface_modes(phydev);
 	if (ret)
 		return ret;
 
-	ret = aqr107_wait_processor_intensive_op(phydev);
+	ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS,
+				 MDIO_PMD_TXDIS_GLOBAL);
 	if (ret)
 		return ret;
 
-	return aqr107_fill_interface_modes(phydev);
+	return aqr107_wait_processor_intensive_op(phydev);
 }
 
 static int aqr107_probe(struct phy_device *phydev)

-- 
2.34.1