Thread (26 messages) 26 messages, 7 authors, 2025-06-17
STALE361d
Revisions (7)
  1. v4 [diff vs current]
  2. v5 current
  3. v6 [diff vs current]
  4. v7 [diff vs current]
  5. v8 [diff vs current]
  6. v9 [diff vs current]
  7. v10 [diff vs current]

[PATCH v5 4/9] arm64: dts: imx93: move i.MX93 specific part from imx91_93_common.dtsi to imx93.dtsi

From: Joy Zou <hidden>
Date: 2025-06-13 10:06:24
Also in: imx, linux-arm-kernel, linux-devicetree, linux-pm, lkml
Subsystem: arm/freescale imx / mxc arm architecture, the rest · Maintainers: Frank Li, Sascha Hauer, Linus Torvalds 

Move i.MX93 specific part from imx91_93_common.dtsi to imx93.dtsi.

Signed-off-by: Joy Zou <redacted>
---
 .../boot/dts/freescale/imx91_93_common.dtsi   | 140 +---------------
 arch/arm64/boot/dts/freescale/imx93.dtsi      | 155 ++++++++++++++++++
 2 files changed, 157 insertions(+), 138 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
index 64cd0776b43d..da4c1c0699b3 100644
--- a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2022 NXP
+ * Copyright 2025 NXP
  */
 
 #include <dt-bindings/clock/imx93-clock.h>
@@ -52,7 +52,7 @@ aliases {
 		spi7 = &lpspi8;
 	};
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -77,58 +77,6 @@ A55_0: cpu@0 {
 			enable-method = "psci";
 			#cooling-cells = <2>;
 			cpu-idle-states = <&cpu_pd_wait>;
-			i-cache-size = <32768>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <128>;
-			d-cache-size = <32768>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
-			next-level-cache = <&l2_cache_l0>;
-		};
-
-		A55_1: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a55";
-			reg = <0x100>;
-			enable-method = "psci";
-			#cooling-cells = <2>;
-			cpu-idle-states = <&cpu_pd_wait>;
-			i-cache-size = <32768>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <128>;
-			d-cache-size = <32768>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
-			next-level-cache = <&l2_cache_l1>;
-		};
-
-		l2_cache_l0: l2-cache-l0 {
-			compatible = "cache";
-			cache-size = <65536>;
-			cache-line-size = <64>;
-			cache-sets = <256>;
-			cache-level = <2>;
-			cache-unified;
-			next-level-cache = <&l3_cache>;
-		};
-
-		l2_cache_l1: l2-cache-l1 {
-			compatible = "cache";
-			cache-size = <65536>;
-			cache-line-size = <64>;
-			cache-sets = <256>;
-			cache-level = <2>;
-			cache-unified;
-			next-level-cache = <&l3_cache>;
-		};
-
-		l3_cache: l3-cache {
-			compatible = "cache";
-			cache-size = <262144>;
-			cache-line-size = <64>;
-			cache-sets = <256>;
-			cache-level = <3>;
-			cache-unified;
 		};
 	};
 
@@ -184,44 +132,6 @@ gic: interrupt-controller@48000000 {
 		interrupt-parent = <&gic>;
 	};
 
-	thermal-zones {
-		cpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <2000>;
-
-			thermal-sensors = <&tmu 0>;
-
-			trips {
-				cpu_alert: cpu-alert {
-					temperature = <80000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu_crit: cpu-crit {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	cm33: remoteproc-cm33 {
-		compatible = "fsl,imx93-cm33";
-		clocks = <&clk IMX93_CLK_CM33_GATE>;
-		status = "disabled";
-	};
-
 	mqs1: mqs1 {
 		compatible = "fsl,imx93-mqs";
 		gpr = <&aonmix_ns_gpr>;
@@ -307,15 +217,6 @@ aonmix_ns_gpr: syscon@44210000 {
 				reg = <0x44210000 0x1000>;
 			};
 
-			mu1: mailbox@44230000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x44230000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_MU1_B_GATE>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
 			system_counter: timer@44290000 {
 				compatible = "nxp,sysctr-timer";
 				reg = <0x44290000 0x30000>;
@@ -519,14 +420,6 @@ src: system-controller@44460000 {
 				#size-cells = <1>;
 				ranges;
 
-				mlmix: power-domain@44461800 {
-					compatible = "fsl,imx93-src-slice";
-					reg = <0x44461800 0x400>, <0x44464800 0x400>;
-					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_ML_APB>,
-						 <&clk IMX93_CLK_ML>;
-				};
-
 				mediamix: power-domain@44462400 {
 					compatible = "fsl,imx93-src-slice";
 					reg = <0x44462400 0x400>, <0x44465800 0x400>;
@@ -542,26 +435,6 @@ clock-controller@44480000 {
 				#clock-cells = <1>;
 			};
 
-			tmu: tmu@44482000 {
-				compatible = "fsl,qoriq-tmu";
-				reg = <0x44482000 0x1000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_TMC_GATE>;
-				little-endian;
-				fsl,tmu-range = <0x800000da 0x800000e9
-						 0x80000102 0x8000012a
-						 0x80000166 0x800001a7
-						 0x800001b6>;
-				fsl,tmu-calibration = <0x00000000 0x0000000e
-						       0x00000001 0x00000029
-						       0x00000002 0x00000056
-						       0x00000003 0x000000a2
-						       0x00000004 0x00000116
-						       0x00000005 0x00000195
-						       0x00000006 0x000001b2>;
-				#thermal-sensor-cells = <1>;
-			};
-
 			micfil: micfil@44520000 {
 				compatible = "fsl,imx93-micfil";
 				reg = <0x44520000 0x10000>;
@@ -677,15 +550,6 @@ wakeupmix_gpr: syscon@42420000 {
 				reg = <0x42420000 0x1000>;
 			};
 
-			mu2: mailbox@42440000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x42440000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_MU2_B_GATE>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
 			wdog3: watchdog@42490000 {
 				compatible = "fsl,imx93-wdt";
 				reg = <0x42490000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index bebb7b4490fb..e7a9348bad7f 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -4,3 +4,158 @@
  */
 
 #include "imx91_93_common.dtsi"
+
+/{
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx93-cm33";
+		clocks = <&clk IMX93_CLK_CM33_GATE>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0: map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&aips1 {
+	mu1: mailbox@44230000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x44230000 0x10000>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU1_B_GATE>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	tmu: tmu@44482000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0x44482000 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_TMC_GATE>;
+		#thermal-sensor-cells = <1>;
+		little-endian;
+		fsl,tmu-range = <0x800000da 0x800000e9
+				 0x80000102 0x8000012a
+				 0x80000166 0x800001a7
+				 0x800001b6>;
+		fsl,tmu-calibration = <0x00000000 0x0000000e
+				       0x00000001 0x00000029
+				       0x00000002 0x00000056
+				       0x00000003 0x000000a2
+				       0x00000004 0x00000116
+				       0x00000005 0x00000195
+				       0x00000006 0x000001b2>;
+	};
+};
+
+&aips2 {
+	mu2: mailbox@42440000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x42440000 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU2_B_GATE>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+};
+
+&cpus {
+	A55_0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x0>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l0>;
+	};
+
+	A55_1: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x100>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l1>;
+	};
+
+	l2_cache_l0: l2-cache-l0 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
+	};
+
+	l2_cache_l1: l2-cache-l1 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
+	};
+
+	l3_cache: l3-cache {
+		compatible = "cache";
+		cache-size = <262144>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <3>;
+		cache-unified;
+	};
+};
+
+&src {
+	mlmix: power-domain@44461800 {
+		compatible = "fsl,imx93-src-slice";
+		reg = <0x44461800 0x400>, <0x44464800 0x400>;
+		clocks = <&clk IMX93_CLK_ML_APB>,
+			 <&clk IMX93_CLK_ML>;
+		#power-domain-cells = <0>;
+	};
+};
-- 
2.37.1
Other recent patches touching these files
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help