This patch provides description of the MTIP L2 switch available in some
NXP's SOCs - e.g. imx287.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
Changes for v2:
- Rename the file to match exactly the compatible
  (nxp,imx287-mtip-switch)
---
 .../bindings/net/nxp,imx287-mtip-switch.yaml  | 165 ++++++++++++++++++
 1 file changed, 165 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/nxp,imx287-mtip-switch.yaml

diff --git a/Documentation/devicetree/bindings/net/nxp,imx287-mtip-switch.yaml b/Documentation/devicetree/bindings/net/nxp,imx287-mtip-switch.yaml
new file mode 100644
index 000000000000..a3e0fe7783ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,imx287-mtip-switch.yaml

@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,imx287-mtip-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP SoC Ethernet Switch Controller (L2 MoreThanIP switch)
+
+maintainers:
+  - Lukasz Majewski <lukma@denx.de>
+
+description:
+  The 2-port switch ethernet subsystem provides ethernet packet (L2)
+  communication and can be configured as an ethernet switch. It provides the
+  reduced media independent interface (RMII), the management data input
+  output (MDIO) for physical layer device (PHY) management.
+
+properties:
+  compatible:
+    const: nxp,imx287-mtip--switch
+
+  reg:
+    maxItems: 1
+    description:
+      The physical base address and size of the MTIP L2 SW module IO range
+
+  phy-supply:
+    description:
+      Regulator that powers Ethernet PHYs.
+
+  clocks:
+    items:
+      - description: Register accessing clock
+      - description: Bus access clock
+      - description: Output clock for external device - e.g. PHY source clock
+      - description: IEEE1588 timer clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+      - const: enet_out
+      - const: ptp
+
+  interrupts:
+    items:
+      - description: Switch interrupt
+      - description: ENET0 interrupt
+      - description: ENET1 interrupt
+
+  pinctrl-names: true
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[0-9]+$":
+        type: object
+        description: MTIP L2 switch external ports
+
+        $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            items:
+              - enum: [1, 2]
+            description: MTIP L2 switch port number
+
+          label:
+            description: Label associated with this port
+
+        required:
+          - reg
+          - label
+          - phy-mode
+          - phy-handle
+
+  mdio:
+    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Specifies the mdio bus in the switch, used as a container for phy nodes.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - mdio
+  - ethernet-ports
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/irq.h>
+    switch@800f0000 {
+        compatible = "nxp,imx287-mtip-switch";
+        reg = <0x800f0000 0x20000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&mac0_pins_a>, <&mac1_pins_a>;
+        phy-supply = <&reg_fec_3v3>;
+        interrupts = <100>, <101>, <102>;
+        clocks = <&clks 57>, <&clks 57>, <&clks 64>, <&clks 35>;
+        clock-names = "ipg", "ahb", "enet_out", "ptp";
+        status = "okay";
+
+        ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                mtip_port1: port@1 {
+                        reg = <1>;
+                        label = "lan0";
+                        local-mac-address = [ 00 00 00 00 00 00 ];
+                        phy-mode = "rmii";
+                        phy-handle = <&ethphy0>;
+                };
+
+                mtip_port2: port@2 {
+                        reg = <2>;
+                        label = "lan1";
+                        local-mac-address = [ 00 00 00 00 00 00 ];
+                        phy-mode = "rmii";
+                        phy-handle = <&ethphy1>;
+                };
+        };
+
+        mdio_sw: mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                reset-gpios = <&gpio2 13 0>;
+                reset-delay-us = <25000>;
+                reset-post-delay-us = <10000>;
+
+                ethphy0: ethernet-phy@0 {
+                        reg = <0>;
+                        smsc,disable-energy-detect;