Hi Jakub,
On Mon, 16 Dec 2024 17:33:33 -0800
Jakub Kicinski [off-list ref] wrote:
On Mon, 16 Dec 2024 09:42:24 +0100 Maxime Chevallier wrote:
quoted
quoted
I've actually already created that series!
Woaw that was fast ! I'll review and give it a test on my setup then.
Maybe one thing to clarify with the net maintainers is that this work
you've done doesn't replace the series this thread is replying to,
which still makes sense (we need the
stmmac_priv->phylink_config.supported_interfaces to be correctly
populated on socfpga).
Ah, sorry. Should have asked.
I assumed since Lynx PCS will have the SGMII and 1000BASEX set -
Russell's patch 5 will copy them for you to
priv->phylink_config.supported_interfaces. Your patch 1 is still needed.
Did I get it wrong?
Both are needed actually :) There are 2 issues on socfpga :
- 1000BaseX needs to be understood by the socfpga wrapper
(dwmac-socfpga) so that the internal serdes is enabled in the wrapper,
that would be patch 1
- The priv->phylink_config.supported_interfaces is incomplete on
dwmac-socfpga. Russell's patch 5 intersects these modes with that the
PCS supports :
+ phy_interface_or(priv->phylink_config.supported_interfaces,
+ priv->phylink_config.supported_interfaces,
+ pcs->supported_interfaces);
So without patch 2 in the series, we'll be missing
PHY_INTERFACE_MODE_1000BASEX in the end result :)
Thanks,
Maxime