[PATCH v3 4/5] wifi: brcmfmac: Add optional lpo clock enable support
From: Jacobe Zang <hidden>
Date: 2024-06-30 07:36:36
Also in:
linux-arm-kernel, linux-devicetree, linux-rockchip, linux-wireless, lkml
Subsystem:
broadcom brcm80211 ieee802.11 wireless drivers, the rest · Maintainers:
Arend van Spriel, Linus Torvalds
WiFi modules often require 32kHz clock to function. Add support to enable the clock to PCIe driver. Co-developed-by: Ondrej Jirman <megi@xff.cz> Signed-off-by: Ondrej Jirman <megi@xff.cz> Signed-off-by: Jacobe Zang <redacted> --- .../net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 06698a714b523..e84f562fc91b8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c@@ -3,6 +3,7 @@ * Copyright (c) 2014 Broadcom Corporation */ +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/firmware.h>
@@ -2411,6 +2412,7 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) struct brcmf_pciedev *pcie_bus_dev; struct brcmf_core *core; struct brcmf_bus *bus; + struct clk *clk; if (!id) { id = pci_match_id(brcmf_pcie_devid_table, pdev);
@@ -2422,6 +2424,14 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device); + clk = devm_clk_get_optional_enabled(&pdev->dev, "lpo"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + if (clk) { + brcmf_dbg(PCIE, "enabling 32kHz clock\n", pdev->vendor, pdev->device); + clk_set_rate(clk, 32768); + } + ret = -ENOMEM; devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL); if (devinfo == NULL)
--
2.34.1