From: Conor Dooley <conor.dooley@microchip.com>

On Mon, 22 Jan 2024 12:19:48 +0000, Conor Dooley wrote:

From: Conor Dooley <conor.dooley@microchip.com>

While reviewing a CAN driver internally for MPFS [1], I realised
that the modeling of the MSSPLL such that only one of its outputs could
be used was not correct. The CAN controllers on MPFS take 2 input
clocks - one that is the bus clock, acquired from the main MSSPLL and
a second clock for the AHB interface to the result of the SoC.
Currently the binding for the CAN controllers and the represetnation
of the MSSPLL only allows for one of these clocks.
Modify the binding and devicetree to expect two clocks and rework the
main clock controller driver for MPFS such that it is capable of
providing multiple outputs from the MSSPLL.

[...]

And this one is applied to riscv-dt-for-next. I don't think sending this
for the -rcs is needed as there's no impact until the CAN driver shows up.

[7/7] riscv: dts: microchip: add missing CAN bus clocks
      https://git.kernel.org/conor/c/6c7353836a91

Thanks,
Conor.