On Mon, 23 Oct 2023 21:16:44 +0530, Parthiban Veerasooran wrote:

Add DT bindings OPEN Alliance 10BASE-T1x MACPHY Serial Interface
parameters. These are generic properties that can apply to any 10BASE-T1x
MAC-PHY which uses OPEN Alliance TC6 specification.

Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
---
 .../devicetree/bindings/net/oa-tc6.yaml       | 72 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/oa-tc6.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/net/oa-tc6.yaml:16:68: [error] syntax error: mapping values are not allowed here (syntax)

dtschema/dtc warnings/errors:
make[2]: *** Deleting file 'Documentation/devicetree/bindings/net/oa-tc6.example.dts'
Documentation/devicetree/bindings/net/oa-tc6.yaml:16:68: mapping values are not allowed in this context
make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/oa-tc6.example.dts] Error 1
make[2]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/net/oa-tc6.yaml:16:68: mapping values are not allowed in this context
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/oa-tc6.yaml: ignoring, error parsing file
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1427: dt_binding_check] Error 2
make: *** [Makefile:234: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231023154649.45931-5-Parthiban.Veerasooran@microchip.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.