Hi Vladimir,

On Fri, Sep 22, 2023 at 03:31:03PM +0200, Lukasz Majewski wrote:

quoted

This patch series provides support for HSR HW offloading in KSZ9477
switch IC.

To test this feature:
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision
45 version 1 ip link set dev lan1 up
ip link set dev lan2 up
ip a add 192.168.0.1/24 dev hsr0
ip link set dev hsr0 up

To remove HSR network device:
ip link del hsr0

To test if one can adjust MAC address:
ip link set lan2 address 00:01:02:AA:BB:CC

It is also possible to create another HSR interface, but it will
only support HSR is software - e.g.
ip link add name hsr1 type hsr slave1 lan3 slave2 lan4 supervision
45 version 1

Test HW:
Two KSZ9477-EVB boards with HSR ports set to "Port1" and "Port2".

Performance SW used:
nuttcp -S --nofork
nuttcp -vv -T 60 -r 192.168.0.2
nuttcp -vv -T 60 -t 192.168.0.2

Code: v6.6.0-rc2+ Linux net-next repository
SHA1: 5a1b322cb0b7d0d33a2d13462294dc0f46911172

Tested HSR v0 and v1
Results:
With KSZ9477 offloading support added: RX: 100 Mbps TX: 98 Mbps
With no offloading 		       RX: 63 Mbps  TX: 63 Mbps  

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Thanks!

I hope, that it will find its way to net-next soon :-).

Thanks for your help and patience.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de