Thread (21 messages) 21 messages, 5 authors, 2024-02-15
STALE870d REVIEWED: 15 (15M)
Revisions (5)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v5 [diff vs current]
  5. v6 current

[PATCH v6 net-next 2/5] net: dsa: notify drivers of MAC address changes on user ports

From: Lukasz Majewski <lukma@denx.de>
Date: 2023-09-22 13:31:40
Also in: lkml
Subsystem: networking [dsa], networking [general], the rest · Maintainers: Andrew Lunn, Vladimir Oltean, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

From: Vladimir Oltean <vladimir.oltean@nxp.com>

In some cases, drivers may need to veto the changing of a MAC address on
a user port. Such is the case with KSZ9477 when it offloads a HSR device,
because it programs the MAC address of multiple ports to a shared
hardware register. Those ports need to have equal MAC addresses for the
lifetime of the HSR offload.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
Changes for v5:
- New patch
Changes for v6:
- None
---
 include/net/dsa.h | 10 ++++++++++
 net/dsa/slave.c   |  7 +++++++
 2 files changed, 17 insertions(+)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 426724808e76..d98439ea6146 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -969,6 +969,16 @@ struct dsa_switch_ops {
 			       struct phy_device *phy);
 	void	(*port_disable)(struct dsa_switch *ds, int port);
 
+
+	/*
+	 * Notification for MAC address changes on user ports. Drivers can
+	 * currently only veto operations. They should not use the method to
+	 * program the hardware, since the operation is not rolled back in case
+	 * of other errors.
+	 */
+	int	(*port_set_mac_address)(struct dsa_switch *ds, int port,
+					const unsigned char *addr);
+
 	/*
 	 * Compatibility between device trees defining multiple CPU ports and
 	 * drivers which are not OK to use by default the numerically smallest
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 2b3d89b77121..4c3e502d7e16 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -457,6 +457,13 @@ static int dsa_slave_set_mac_address(struct net_device *dev, void *a)
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 
+	if (ds->ops->port_set_mac_address) {
+		err = ds->ops->port_set_mac_address(ds, dp->index,
+						    addr->sa_data);
+		if (err)
+			return err;
+	}
+
 	/* If the port is down, the address isn't synced yet to hardware or
 	 * to the DSA master, so there is nothing to change.
 	 */
-- 
2.20.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help