Thread (35 messages) 35 messages, 8 authors, 2023-10-17

Re: [PATCH V2 3/7] clk: qcom: gcc-ipq9574: Add gpll0_out_aux clock

From: Kathiravan T <hidden>
Date: 2023-09-01 16:16:25
Also in: linux-arm-kernel, linux-arm-msm, linux-clk, linux-devicetree, lkml

On 8/25/2023 2:42 PM, Devi Priya wrote:
quoted hunk ↗ jump to hunk
Add support for gpll0_out_aux clock which acts as the parent for
certain networking subsystem (nss) clocks.

Signed-off-by: Devi Priya <redacted>
---
  drivers/clk/qcom/gcc-ipq9574.c | 16 ++++++++++++++++
  1 file changed, 16 insertions(+)
diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
index 8f430367299e..495a66f7d29a 100644
--- a/drivers/clk/qcom/gcc-ipq9574.c
+++ b/drivers/clk/qcom/gcc-ipq9574.c
@@ -107,6 +107,21 @@ static struct clk_alpha_pll_postdiv gpll0 = {
  	},
  };
  
+static struct clk_alpha_pll_postdiv gpll0_out_aux = {
+	.offset = 0x20000,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.width = 4,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "gpll0_out_aux",
+		.parent_hws = (const struct clk_hw *[]) {
+			&gpll0_main.clkr.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,

You might need to drop the member 'flags '. Please refer 
https://lore.kernel.org/linux-arm-msm/1693474133-10467-1-git-send-email-quic_varada@quicinc.com/ (local)

I will send the patch to drop the flags in the existing driver sometime 
next week.

Thanks,

quoted hunk ↗ jump to hunk
+		.ops = &clk_alpha_pll_postdiv_ro_ops,
+	},
+};
+
  static struct clk_alpha_pll gpll4_main = {
  	.offset = 0x22000,
  	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
@@ -4144,6 +4159,7 @@ static struct clk_regmap *gcc_ipq9574_clks[] = {
  	[GCC_SNOC_PCIE1_1LANE_S_CLK] = &gcc_snoc_pcie1_1lane_s_clk.clkr,
  	[GCC_SNOC_PCIE2_2LANE_S_CLK] = &gcc_snoc_pcie2_2lane_s_clk.clkr,
  	[GCC_SNOC_PCIE3_2LANE_S_CLK] = &gcc_snoc_pcie3_2lane_s_clk.clkr,
+	[GPLL0_OUT_AUX] = &gpll0_out_aux.clkr,
  };
  
  static const struct qcom_reset_map gcc_ipq9574_resets[] = {
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help