[PATCH 11/28] qed: Drop redundant pci_enable_pcie_error_reporting()

From: Bjorn Helgaas <bhelgaas@google.com>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ariel Elior <redacted>
Cc: Manish Chopra <manishc@marvell.com>
---
 drivers/net/ethernet/qlogic/qed/qed_main.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index c91898be7c03..f5af83342856 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c

@@ -23,7 +23,6 @@
 #include <linux/qed/qed_if.h>
 #include <linux/qed/qed_ll2_if.h>
 #include <net/devlink.h>
-#include <linux/aer.h>
 #include <linux/phylink.h>
 
 #include "qed.h"

@@ -259,8 +258,6 @@ static void qed_free_pci(struct qed_dev *cdev)
 {
 	struct pci_dev *pdev = cdev->pdev;
 
-	pci_disable_pcie_error_reporting(pdev);
-
 	if (cdev->doorbells && cdev->db_size)
 		iounmap(cdev->doorbells);
 	if (cdev->regview)

@@ -366,12 +363,6 @@ static int qed_init_pci(struct qed_dev *cdev, struct pci_dev *pdev)
 		return -ENOMEM;
 	}
 
-	/* AER (Advanced Error reporting) configuration */
-	rc = pci_enable_pcie_error_reporting(pdev);
-	if (rc)
-		DP_VERBOSE(cdev, NETIF_MSG_DRV,
-			   "Failed to configure PCIe AER [%d]\n", rc);
-
 	return 0;
 
 err2:

-- 
2.25.1