[PATCH 03/28] bnx2: Drop redundant pci_enable_pcie_error_reporting()
From: Bjorn Helgaas <helgaas@kernel.org>
Date: 2023-03-07 18:25:12
Also in:
lkml
Subsystem:
broadcom bnx2 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Rasesh Mody, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Bjorn Helgaas <bhelgaas@google.com>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
cd709aa90648 ("bnx2: Add PCI Advanced Error Reporting support.") added
pci_enable_pcie_error_reporting() for all devices, and c239f279e571 ("bnx2:
Enable AER on PCIE devices only") restricted it to BNX2_CHIP_5709 devices
to avoid an error message when it failed on non-PCIe devices. The PCI core
only enables PCIe error reporting on PCIe devices, which I assume means
BNX2_CHIP_5709.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rasesh Mody <rmody@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Cc: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2.c | 21 ---------------------
drivers/net/ethernet/broadcom/bnx2.h | 1 -
2 files changed, 22 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 9f473854b0f4..a66137b8d1a6 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c@@ -48,7 +48,6 @@ #include <linux/cache.h> #include <linux/firmware.h> #include <linux/log2.h> -#include <linux/aer.h> #include <linux/crash_dump.h> #if IS_ENABLED(CONFIG_CNIC)
@@ -8093,7 +8092,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) int rc, i, j; u32 reg; u64 dma_mask, persist_dma_mask; - int err; SET_NETDEV_DEV(dev, &pdev->dev); bp = netdev_priv(dev);
@@ -8176,12 +8174,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->flags |= BNX2_FLAG_PCIE; if (BNX2_CHIP_REV(bp) == BNX2_CHIP_REV_Ax) bp->flags |= BNX2_FLAG_JUMBO_BROKEN; - - /* AER (Advanced Error Reporting) hooks */ - err = pci_enable_pcie_error_reporting(pdev); - if (!err) - bp->flags |= BNX2_FLAG_AER_ENABLED; - } else { bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); if (bp->pcix_cap == 0) {
@@ -8460,11 +8452,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) return 0; err_out_unmap: - if (bp->flags & BNX2_FLAG_AER_ENABLED) { - pci_disable_pcie_error_reporting(pdev); - bp->flags &= ~BNX2_FLAG_AER_ENABLED; - } - pci_iounmap(pdev, bp->regview); bp->regview = NULL;
@@ -8638,11 +8625,6 @@ bnx2_remove_one(struct pci_dev *pdev) bnx2_free_stats_blk(dev); kfree(bp->temp_stats_blk); - if (bp->flags & BNX2_FLAG_AER_ENABLED) { - pci_disable_pcie_error_reporting(pdev); - bp->flags &= ~BNX2_FLAG_AER_ENABLED; - } - bnx2_release_firmware(bp); free_netdev(dev);
@@ -8766,9 +8748,6 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev) } rtnl_unlock(); - if (!(bp->flags & BNX2_FLAG_AER_ENABLED)) - return result; - return result; }
diff --git a/drivers/net/ethernet/broadcom/bnx2.h b/drivers/net/ethernet/broadcom/bnx2.h
index a09ec47461c9..315b08c64edd 100644
--- a/drivers/net/ethernet/broadcom/bnx2.h
+++ b/drivers/net/ethernet/broadcom/bnx2.h@@ -6808,7 +6808,6 @@ struct bnx2 { #define BNX2_FLAG_JUMBO_BROKEN 0x00000800 #define BNX2_FLAG_CAN_KEEP_VLAN 0x00001000 #define BNX2_FLAG_BROKEN_STATS 0x00002000 -#define BNX2_FLAG_AER_ENABLED 0x00004000 struct bnx2_napi bnx2_napi[BNX2_MAX_MSIX_VEC];
--
2.25.1