[RFC/RFTv3 19/24] net: usb: lan78xx: Fixup EEE
From: Andrew Lunn <andrew@lunn.ch>
Date: 2023-03-31 00:56:03
Subsystem:
networking drivers, the rest, usb lan78xx ethernet driver, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds, Thangaraj Samynathan, Rengarajan Sundararajan
The enabling/disabling of EEE in the MAC should happen as a result of auto negotiation. So move the enable/disable into lan783xx_phy_link_status_change() which gets called by phylib when there is a change in link status. lan78xx_set_eee() now just programs the hardware with the LTI timer value, and passed everything else to phylib, so it can correctly setup the PHY. lan743x_get_eee() relies on phylib doing most of the work, the MAC driver just adds the LTI timer value. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v3: Fixup compiler error, missing read in read/modify/write. --- drivers/net/usb/lan78xx.c | 42 +++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index c458c030fadf..729183e57080 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c@@ -1690,17 +1690,10 @@ static int lan78xx_get_eee(struct net_device *net, struct ethtool_eee *edata) ret = lan78xx_read_reg(dev, MAC_CR, &buf); if (buf & MAC_CR_EEE_EN_) { - edata->eee_enabled = true; - edata->eee_active = !!(edata->advertised & - edata->lp_advertised); - edata->tx_lpi_enabled = true; /* EEE_TX_LPI_REQ_DLY & tx_lpi_timer are same uSec unit */ ret = lan78xx_read_reg(dev, EEE_TX_LPI_REQ_DLY, &buf); edata->tx_lpi_timer = buf; } else { - edata->eee_enabled = false; - edata->eee_active = false; - edata->tx_lpi_enabled = false; edata->tx_lpi_timer = 0; }
@@ -1721,24 +1714,16 @@ static int lan78xx_set_eee(struct net_device *net, struct ethtool_eee *edata) if (ret < 0) return ret; - if (edata->eee_enabled) { - ret = lan78xx_read_reg(dev, MAC_CR, &buf); - buf |= MAC_CR_EEE_EN_; - ret = lan78xx_write_reg(dev, MAC_CR, buf); - - phy_ethtool_set_eee(net->phydev, edata); - - buf = (u32)edata->tx_lpi_timer; - ret = lan78xx_write_reg(dev, EEE_TX_LPI_REQ_DLY, buf); - } else { - ret = lan78xx_read_reg(dev, MAC_CR, &buf); - buf &= ~MAC_CR_EEE_EN_; - ret = lan78xx_write_reg(dev, MAC_CR, buf); - } + ret = phy_ethtool_set_eee(net->phydev, edata); + if (ret < 0) + goto out; + buf = (u32)edata->tx_lpi_timer; + ret = lan78xx_write_reg(dev, EEE_TX_LPI_REQ_DLY, buf); +out: usb_autopm_put_interface(dev->intf); - return 0; + return ret; } static u32 lan78xx_get_link(struct net_device *net)
@@ -2114,7 +2099,20 @@ static void lan78xx_remove_mdio(struct lan78xx_net *dev) static void lan78xx_link_status_change(struct net_device *net) { + struct lan78xx_net *dev = netdev_priv(net); struct phy_device *phydev = net->phydev; + u32 data; + int ret; + + ret = lan78xx_read_reg(dev, MAC_CR, &data); + if (ret < 0) + return; + + if (phydev->eee_active) + data |= MAC_CR_EEE_EN_; + else + data &= ~MAC_CR_EEE_EN_; + lan78xx_write_reg(dev, MAC_CR, data); phy_print_status(phydev); }
--
2.40.0