On Fri, Jul 01, 2022 at 05:51:33AM +0000, Arun.Ramadoss@microchip.com wrote:

quoted

quoted

+void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
+                           struct phylink_config *config)
+{
+     config->mac_capabilities = MAC_100FD;
+
+     if (dev->info->supports_rgmii[port]) {
+             /* MII/RMII/RGMII ports */
+             config->mac_capabilities |= MAC_ASYM_PAUSE |
MAC_SYM_PAUSE |
+                                         MAC_100HD | MAC_10 |
MAC_1000FD;

And SGMII too? (Which seems to be a given because from your list in
the
series cover message, SGMII ports also support RGMII).

No, SGMII port does not support the RGMII. I have mentioned in the
cover message that LAN9373 has 2 RGMII and 1 SGMII port. No other part
number has SGMII port.

So when using SGMII, there's no way for pause frames to be supported?
It seems a bit weird that the pause frame capability is dependent on
the interface type, as pause frames are just the same as normal
ethernet frames, except they're ggenerally enerated and/or interpreted
by the MAC.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!