[PATCH v3 net-next 03/12] net: dsa: mt7530: iterate using dsa_switch_for_each_user_port in bridging ops
flat view
STALE1784d
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: 2021-12-06 17:04:35
Subsystem:
mediatek switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Chester A. Unal, Daniel Golle, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
Revision v3 (3 revisions archived).
Revisions (3)
- rfc
- v2 [diff against previous]
- v3 current [diff against previous]
Avoid repeated calls to dsa_to_port() (some hidden behind dsa_is_user_port
and some in plain sight) by keeping two struct dsa_port references: one
to the port passed as argument, and another to the other ports of the
switch that we're iterating over.
dsa_to_port(ds, i) gets replaced by other_dp, i gets replaced by
other_port which is derived from other_dp->index, dsa_is_user_port is
handled by the DSA iterator.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v2->v3: patch is split out of "net: dsa: hide dp->bridge_dev and
dp->bridge_num behind helpers"
drivers/net/dsa/mt7530.c | 52 +++++++++++++++++++++++-----------------
1 file changed, 30 insertions(+), 22 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 9890672a206d..f7238f09d395 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c@@ -1188,27 +1188,31 @@ static int mt7530_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *bridge) { - struct mt7530_priv *priv = ds->priv; + struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; u32 port_bitmap = BIT(MT7530_CPU_PORT); - int i; + struct mt7530_priv *priv = ds->priv; mutex_lock(&priv->reg_mutex); - for (i = 0; i < MT7530_NUM_PORTS; i++) { + dsa_switch_for_each_user_port(other_dp, ds) { + int other_port = other_dp->index; + + if (dp == other_dp) + continue; + /* Add this port to the port matrix of the other ports in the * same bridge. If the port is disabled, port matrix is kept * and not being setup until the port becomes enabled. */ - if (dsa_is_user_port(ds, i) && i != port) { - if (dsa_to_port(ds, i)->bridge_dev != bridge) - continue; - if (priv->ports[i].enable) - mt7530_set(priv, MT7530_PCR_P(i), - PCR_MATRIX(BIT(port))); - priv->ports[i].pm |= PCR_MATRIX(BIT(port)); + if (other_dp->bridge_dev != bridge) + continue; - port_bitmap |= BIT(i); - } + if (priv->ports[other_port].enable) + mt7530_set(priv, MT7530_PCR_P(other_port), + PCR_MATRIX(BIT(port))); + priv->ports[other_port].pm |= PCR_MATRIX(BIT(port)); + + port_bitmap |= BIT(other_port); } /* Add the all other ports to this port matrix. */
@@ -1301,24 +1305,28 @@ static void mt7530_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *bridge) { + struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; struct mt7530_priv *priv = ds->priv; - int i; mutex_lock(&priv->reg_mutex); - for (i = 0; i < MT7530_NUM_PORTS; i++) { + dsa_switch_for_each_user_port(other_dp, ds) { + int other_port = other_dp->index; + + if (dp == other_dp) + continue; + /* Remove this port from the port matrix of the other ports * in the same bridge. If the port is disabled, port matrix * is kept and not being setup until the port becomes enabled. */ - if (dsa_is_user_port(ds, i) && i != port) { - if (dsa_to_port(ds, i)->bridge_dev != bridge) - continue; - if (priv->ports[i].enable) - mt7530_clear(priv, MT7530_PCR_P(i), - PCR_MATRIX(BIT(port))); - priv->ports[i].pm &= ~PCR_MATRIX(BIT(port)); - } + if (other_dp->bridge_dev != bridge) + continue; + + if (priv->ports[other_port].enable) + mt7530_clear(priv, MT7530_PCR_P(other_port), + PCR_MATRIX(BIT(port))); + priv->ports[other_port].pm &= ~PCR_MATRIX(BIT(port)); } /* Set the cpu port to be the only one in the port matrix of
--
2.25.1