Re: [RFC PATCH v2 net-next 06/16] net: dsa: sync multicast router state when joining the bridge
From: Vladimir Oltean <olteanv@gmail.com>
Date: 2021-03-22 11:44:04
Also in:
linux-omap, lkml
On Mon, Mar 22, 2021 at 12:17:33PM +0100, Tobias Waldekranz wrote:
On Fri, Mar 19, 2021 at 01:18, Vladimir Oltean [off-list ref] wrote:quoted
From: Vladimir Oltean <vladimir.oltean@nxp.com> Make sure that the multicast router setting of the bridge is picked up correctly by DSA when joining, regardless of whether there are sandwiched interfaces or not. The SWITCHDEV_ATTR_ID_BRIDGE_MROUTER port attribute is only emitted from br_mc_router_state_change. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- net/dsa/port.c | 10 ++++++++++ 1 file changed, 10 insertions(+)diff --git a/net/dsa/port.c b/net/dsa/port.c index ac1afe182c3b..8380509ee47c 100644 --- a/net/dsa/port.c +++ b/net/dsa/port.c@@ -189,6 +189,10 @@ static int dsa_port_switchdev_sync(struct dsa_port *dp, if (err && err != -EOPNOTSUPP) return err; + err = dsa_port_mrouter(dp->cpu_dp, br_multicast_router(br), extack); + if (err && err != -EOPNOTSUPP) + return err; + return 0; }@@ -212,6 +216,12 @@ static void dsa_port_switchdev_unsync(struct dsa_port *dp) dsa_port_set_state_now(dp, BR_STATE_FORWARDING); /* VLAN filtering is handled by dsa_switch_bridge_leave */ + + /* Some drivers treat the notification for having a local multicast + * router by allowing multicast to be flooded to the CPU, so we should + * allow this in standalone mode too. + */ + dsa_port_mrouter(dp->cpu_dp, true, NULL);Is this really for the DSA layer to decide? The driver has already been notified that at least one port is now in standalone mode. So if that particular driver then requires all multicast to be flooded towards the CPU, it can make that decision on its own. E.g. say that you implement standalone mode using a matchall TCAM rule that maps all frames coming in on a particular port to the CPU. You could still leave flooding of unknown multicast off in that case. Now that driver has to figure out if the notification about a multicast router on the CPU is a real router, or the DSA layer telling it something that it can safely ignore. Today I think that most (all?) DSA drivers treats mrouter in the same way as the multicast flooding bridge flag. But AFAIK, the semantic meaning of the setting is "flood IP multicast to this port because there is a router behind it somewhere". This means unknown _IP_ multicast, but also all known (IGMP/MLD) groups. As most smaller devices cannot separate IP multicast from the non-IP variety, we flood everything. But we should also make sure that the port in question receives all known groups for the _bridge_ in question. Because this is really a bridge setting, though that information is not carried over to the driver today. So reusing it in this way feels like it could be problematic down the road.
I agree with your objections in principle, but somehow I would like to
make progress with this patch series which is not really about how we
deal with IP multicast flooding to the CPU port in standalone ports
mode, so I would like to not get bogged down too much into this for now.
Don't forget that up until recent commit a8b659e7ff75 ("net: dsa: act as
passthrough for bridge port flags"), DSA drivers had no real idea
whether multicast flooding was meant for IP or not. And in standalone
mode, the way things work now is that the CPU port should see all
traffic, so it isn't wrong to do what this patch does.
Unless you see a breaking change introduced by this patch, we can
revisit this discussion for the "RX filtering on DSA" series, where it
is more relevant.