Thread (37 messages) 37 messages, 8 authors, 2021-09-30

Re: [PATCH net] virtio-net: suppress bad irq warning for tx napi

From: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Date: 2021-02-09 14:59:38
Also in: virtualization

quoted
quoted
quoted
I have no preference. Just curious, especially if it complicates the patch.
My understanding is that. It's probably ok for net. But we probably need
to document the assumptions to make sure it was not abused in other drivers.

Introduce new parameters for find_vqs() can help to eliminate the subtle
stuffs but I agree it looks like a overkill.

(Btw, I forget the numbers but wonder how much difference if we simple
remove the free_old_xmits() from the rx NAPI path?)
The committed patchset did not record those numbers, but I found them
in an earlier iteration:

   [PATCH net-next 0/3] virtio-net tx napi
   https://lists.openwall.net/netdev/2017/04/02/55

It did seem to significantly reduce compute cycles ("Gcyc") at the
time. For instance:

     TCP_RR Latency (us):
     1x:
       p50              24       24       21
       p99              27       27       27
       Gcycles         299      432      308

I'm concerned that removing it now may cause a regression report in a
few months. That is higher risk than the spurious interrupt warning
that was only reported after years of use.

Right.

So if Michael is fine with this approach, I'm ok with it. But we
probably need to a TODO to invent the interrupt handlers that can be
used for more than one virtqueues. When MSI-X is enabled, the interrupt
handler (vring_interrup()) assumes the interrupt is used by a single
virtqueue.
Thanks.

The approach to schedule tx-napi from virtnet_poll_cleantx instead of
cleaning directly in this rx-napi function was not effective at
suppressing the warning, I understand.

It should be easy to drop the spurious rate to a little under 99%
percent, if only to suppress the warning. By probabilistically
cleaning in virtnet_poll_cleantx only every 98/100, say. But that
really is a hack.

There does seem to be a huge potential for cycle savings if we can
really avoid the many spurious interrupts.

As scheduling napi_tx from virtnet_poll_cleantx is not effective,
agreed that we should probably look at the more complete solution to
handle both tx and rx virtqueues from the same IRQ.

And revert this explicit warning suppression patch once we have that.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help