[PATCH v3 2/5] dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
From: Michael Grzeschik <hidden>
Date: 2020-05-08 15:44:03
Also in:
linux-devicetree
Subsystem:
ethernet phy library, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Microchip SMI0 Mode is a special mode, where the MDIO Read/Write commands are part of the PHY Address and the OP Code is always 0. We add the compatible for this special mode of the bitbanged mdio driver. Cc: devicetree@vger.kernel.org Signed-off-by: Michael Grzeschik <redacted> --- Documentation/devicetree/bindings/net/mdio-gpio.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt
index 8dbcf8295c6c9c..4d91a36c5cf503 100644
--- a/Documentation/devicetree/bindings/net/mdio-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.txt@@ -2,6 +2,7 @@ MDIO on GPIOs Currently defined compatibles: - virtual,gpio-mdio +- microchip,mdio-smi0 MDC and MDIO lines connected to GPIO controllers are listed in the gpios property as described in section VIII.1 in the following order:
--
2.26.2