Re: [PATCH v2 net-next/devicetree 0/5] DT bindings for Felix DSA switch on LS1028A

This series officializes the device tree bindings for the embedded
Ethernet switch on NXP LS1028A (and for the reference design board).
The driver has been in the tree since v5.4-rc6.

As per feedback received in v1, I've changed the DT bindings for the
internal ports from "gmii" to "internal". So I would like the entire
series to be merged through a single tree, be it net-next or devicetree.
If this happens, I would like the other maintainer to acknowledge this
fact and the patches themselves. Thanks.

Claudiu Manoil (2):
  arm64: dts: fsl: ls1028a: add node for Felix switch
  arm64: dts: fsl: ls1028a: enable switch PHYs on RDB

Vladimir Oltean (3):
  arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC
    RCIE
  net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII
  dt-bindings: net: dsa: ocelot: document the vsc9959 core

For all patches except 5/5 (because it was tested on a custom board) and
with patch from [1] applied:

Tested-by: Michael Walle <redacted>

-michael

[1] https://patchwork.ozlabs.org/patch/1239296/

 .../devicetree/bindings/net/dsa/ocelot.txt    | 96 +++++++++++++++++++
 .../boot/dts/freescale/fsl-ls1028a-rdb.dts    | 51 ++++++++++
 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 85 +++++++++++++++-
 drivers/net/dsa/ocelot/felix.c                |  3 +-
 drivers/net/dsa/ocelot/felix_vsc9959.c        |  3 +-
 5 files changed, 232 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/ocelot.txt

-- 
2.17.1