[PATCH v2 net-next/devicetree 5/5] arm64: dts: fsl: ls1028a: enable switch PHYs on RDB
From: Vladimir Oltean <olteanv@gmail.com>
Date: 2020-02-19 15:13:18
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Claudiu Manoil <claudiu.manoil@nxp.com> Link the switch PHY nodes to the central MDIO controller PCIe endpoint node on LS1028A (implemented as PF3) so that PHYs are accessible via MDIO. Enable SGMII AN on the Felix PCS by telling PHYLINK that the VSC8514 quad PHY is capable of in-band-status. The PHYs are used in poll mode due to an issue with the interrupt line on current revisions of the LS1028A-RDB board. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Alex Marginean <redacted> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- Changes in v2: None. .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index afb55653850d..9353c00e46a7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts@@ -194,6 +194,57 @@ status = "disabled"; }; +&enetc_mdio_pf3 { + /* VSC8514 QSGMII quad PHY */ + qsgmii_phy0: ethernet-phy@10 { + reg = <0x10>; + }; + + qsgmii_phy1: ethernet-phy@11 { + reg = <0x11>; + }; + + qsgmii_phy2: ethernet-phy@12 { + reg = <0x12>; + }; + + qsgmii_phy3: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&mscc_felix_port0 { + status = "okay"; + label = "swp0"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy0>; + phy-mode = "qsgmii"; +}; + +&mscc_felix_port1 { + status = "okay"; + label = "swp1"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy1>; + phy-mode = "qsgmii"; +}; + +&mscc_felix_port2 { + status = "okay"; + label = "swp2"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy2>; + phy-mode = "qsgmii"; +}; + +&mscc_felix_port3 { + status = "okay"; + label = "swp3"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy3>; + phy-mode = "qsgmii"; +}; + &sai4 { status = "okay"; };
--
2.17.1