[PATCH net v2 3/9] r8152: get default setting of WOL before initializing
From: Hayes Wang <hidden>
Date: 2020-01-22 01:43:44
Also in:
linux-usb, lkml
Subsystem:
networking drivers, the rest, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Initailization would reset runtime suspend by tp->saved_wolopts, so the tp->saved_wolopts should be set before initializing. Signed-off-by: Hayes Wang <redacted> --- drivers/net/usb/r8152.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 504db2348a3e..c3217a5c2fe1 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c@@ -6739,6 +6739,11 @@ static int rtl8152_probe(struct usb_interface *intf, intf->needs_remote_wakeup = 1; + if (!rtl_can_wakeup(tp)) + __rtl_set_wol(tp, 0); + else + tp->saved_wolopts = __rtl_get_wol(tp); + tp->rtl_ops.init(tp); #if IS_BUILTIN(CONFIG_USB_RTL8152) /* Retry in case request_firmware() is not ready yet. */
@@ -6756,10 +6761,6 @@ static int rtl8152_probe(struct usb_interface *intf, goto out1; } - if (!rtl_can_wakeup(tp)) - __rtl_set_wol(tp, 0); - - tp->saved_wolopts = __rtl_get_wol(tp); if (tp->saved_wolopts) device_set_wakeup_enable(&udev->dev, true); else
--
2.21.0