[PATCH net v2 1/9] r8152: fix runtime resume for linking change
From: Hayes Wang <hidden>
Date: 2020-01-22 01:41:57
Also in:
linux-usb, lkml
Subsystem:
networking drivers, the rest, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Fix the runtime resume doesn't work normally for linking change. 1. Reset the settings and status of runtime suspend. 2. Sync the linking status. 3. Poll the linking change. Signed-off-by: Hayes Wang <redacted> --- drivers/net/usb/r8152.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 031cb8fff909..115559707683 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c@@ -365,8 +365,10 @@ #define DEBUG_LTSSM 0x0082 /* PLA_EXTRA_STATUS */ +#define CUR_LINK_OK BIT(15) #define U3P3_CHECK_EN BIT(7) /* RTL_VER_05 only */ #define LINK_CHANGE_FLAG BIT(8) +#define POLL_LINK_CHG BIT(0) /* USB_USB2PHY */ #define USB2PHY_SUSPEND 0x0001
@@ -5387,6 +5389,16 @@ static void r8153_init(struct r8152 *tp) else ocp_data |= DYNAMIC_BURST; ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data); + + r8153_queue_wake(tp, false); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); + if (rtl8152_get_speed(tp) & LINK_STATUS) + ocp_data |= CUR_LINK_OK; + else + ocp_data &= ~CUR_LINK_OK; + ocp_data |= POLL_LINK_CHG; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); } ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2);
@@ -5416,6 +5428,7 @@ static void r8153_init(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001); r8153_power_cut_en(tp, false); + rtl_runtime_suspend_enable(tp, false); r8153_u1u2en(tp, true); r8153_mac_clk_spd(tp, false); usb_enable_lpm(tp->udev);
@@ -5484,6 +5497,14 @@ static void r8153b_init(struct r8152 *tp) r8153b_ups_en(tp, false); r8153_queue_wake(tp, false); rtl_runtime_suspend_enable(tp, false); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); + if (rtl8152_get_speed(tp) & LINK_STATUS) + ocp_data |= CUR_LINK_OK; + else + ocp_data &= ~CUR_LINK_OK; + ocp_data |= POLL_LINK_CHG; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); r8153b_u1u2en(tp, true); usb_enable_lpm(tp->udev);
--
2.21.0