Re: [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings

From
Florian Fainelli <f.fainelli@gmail.com>
Date
2019-10-25 17:47:32
Also in
linux-devicetree, linux-omap, lkml
Reply to
Grygorii Strashko, 2019-10-24
On 10/24/19 3:09 AM, Grygorii Strashko wrote:
Add bindings for the new TI CPSW switch driver. Comparing to the legacy
bindings (net/cpsw.txt):
- ports definition follows DSA bindings (net/dsa/dsa.txt) and ports can be
marked as "disabled" if not physically wired.
- all deprecated properties dropped;
- all legacy propertiies dropped which represent constant HW cpapbilities
(cpdma_channels, ale_entries, bd_ram_size, mac_control, slaves,
active_slave)
- TI CPTS DT properties are reused as is, but grouped in "cpts" sub-node
- TI Davinci MDIO DT bindings are reused as is, because Davinci MDIO is
reused.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
[snip]
+- mdio : CPSW MDIO bus block description
+	- bus_freq : MDIO Bus frequency
clock-frequency is a more typical property to describe the bus clock's
frequency, that is what i2c and spi do.
quoted hunk ↗ jump to hunk
+	See bindings/net/mdio.txt and davinci-mdio.txt
+
+- cpts : The Common Platform Time Sync (CPTS) module description
+	- clocks : should contain the CPTS reference clock
+	- clock-names : should be "cpts"
+	See bindings/clock/clock-bindings.txt
+
+	Optional properties - all ports:
+	- cpts_clock_mult : Numerator to convert input clock ticks into ns
+	- cpts_clock_shift : Denominator to convert input clock ticks into ns
+			  Mult and shift will be calculated basing on CPTS
+			  rftclk frequency if both cpts_clock_shift and
+			  cpts_clock_mult properties are not provided.
Why would those two be needed that would be modeled in the Linux Common
Clock Framework?
-- 
Florian
Thread (38 messages) 38 messages, 5 authors, last reply 2019-11-12
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help