Re: [PATCH v6 1/4] dt-bindings: net: phy: Add subnode for LED configuration
From: Andrew Lunn <andrew@lunn.ch>
Date: 2019-08-13 19:54:41
Also in:
linux-devicetree, lkml
On Tue, Aug 13, 2019 at 12:11:44PM -0700, Matthias Kaehlcke wrote:
The LED behavior of some Ethernet PHYs is configurable. Add an optional 'leds' subnode with a child node for each LED to be configured. The binding aims to be compatible with the common LED binding (see devicetree/bindings/leds/common.txt). A LED can be configured to be: - 'on' when a link is active, some PHYs allow configuration for certain link speeds speeds - 'off' - blink on RX/TX activity, some PHYs allow configuration for certain link speeds For the configuration to be effective it needs to be supported by the hardware and the corresponding PHY driver. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew