Re: [RFC PATCH net-next 06/13] net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch
From: Vladimir Oltean <olteanv@gmail.com>
Date: 2019-03-26 17:53:00
From: Vladimir Oltean <olteanv@gmail.com>
Date: 2019-03-26 17:53:00
Hi Florian, I am grateful for the thorough review you made to the entire patchset. It's nice to meet passionate people whom I can share ideas with. On Tue, 26 Mar 2019 at 15:02, Florian Fainelli [off-list ref] wrote:
On 3/23/2019 8:23 PM, Vladimir Oltean wrote:quoted
At this moment the following is supported: * Link state management through phylibNot a show stopper for now, and your implementation looks sane, though I would recommend implementing phylink to be future proof, and especially since you support SGMII. I was not able to review everything deeply so: Acked-by: Florian Fainelli <f.fainelli@gmail.com> -- Florian
I don't think SGMII works at this point, with the current enablement. When I send the first non-RFC patchset I think I'm going to completely remove it (along with some other momentarily unused code). I'll add it back when I can put my hands on a board where the SGMII interface is actually routed - hopefully in a few weeks at most. Then I can also rework the MAC adaptation to PHY portion to use phylink instead of phylib, for "future-proofing". Thank you! -Vladimir