Hi Alexandre,

On Fri, Sep 14, 2018 at 08:02:22PM +0200, Alexandre Belloni wrote:

On 14/09/2018 18:26:38+0200, Quentin Schulz wrote:

quoted

Hi Alexandre,

On Fri, Sep 14, 2018 at 04:54:46PM +0200, Alexandre Belloni wrote:

quoted

Hi,

On 14/09/2018 11:44:26+0200, Quentin Schulz wrote:

quoted

In order to use GPIO4 as a GPIO, we need to mux it in this mode so let's
declare a new pinctrl DT node for it.

Signed-off-by: Quentin Schulz <redacted>
---
 arch/mips/boot/dts/mscc/ocelot.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 8ce317c..b5c4c74 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi

@@ -182,6 +182,11 @@
 			interrupts = <13>;
 			#interrupt-cells = <2>;
 
+			gpio4: gpio4 {
+				pins = "GPIO_4";
+				function = "gpio";
+			};
+

For a GPIO, I would do that in the board dts because it is not used
directly in the dtsi.

And the day we've two boards using this pinctrl we move it to a dtsi. Is
that the plan?

Not really, at least not for gpios. I've included the pinctrl for the
uart, i2c and spi because they are the only option if you are to use
those peripherals. Else, I've would have left the pinctrl to the board
file. From my point of view, the gpios are too board specific to be in a
soc dtsi.

Understood, will move it to the board file.

Thanks,
Quentin