[PATCH net-next 3/7] net: phy: mscc: split config_init in two functions for VSC8584
From: Quentin Schulz <hidden>
Date: 2018-09-14 09:45:07
Also in:
linux-devicetree, linux-mips, lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Part of the config init is common between the VSC8584 and the VSC8574, so to prepare the upcoming support for VSC8574, separate config_init PHY-specific code to config_pre_init function which is set in the probe function of the PHY and used in config_init. Signed-off-by: Quentin Schulz <redacted> --- drivers/net/phy/mscc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index b450489..69cc3cf 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c@@ -355,6 +355,7 @@ struct vsc8531_private { u64 *stats; int nstats; bool pkg_init; + int (*config_pre_init)(struct mii_bus *bus, int phy); }; #ifdef CONFIG_OF_MDIO
@@ -1298,7 +1299,7 @@ static int vsc8584_config_init(struct phy_device *phydev) */ if (!vsc8584_is_pkg_init(phydev, base_addr, val & PHY_ADDR_REVERSED ? 1 : 0)) { - ret = vsc8584_config_pre_init(phydev->mdio.bus, base_addr); + ret = vsc8531->config_pre_init(phydev->mdio.bus, base_addr); if (ret) goto err; }
@@ -1486,6 +1487,7 @@ static int vsc8584_probe(struct phy_device *phydev) phydev->priv = vsc8531; + vsc8531->config_pre_init = vsc8584_config_pre_init; vsc8531->nleds = 4; vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES; vsc8531->hw_stats = vsc8584_hw_stats;
--
git-series 0.9.1