[PATCH 1/4] MIPS: lantiq: Do not enable IRQs in dma open
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: 2018-07-21 20:08:18
Also in:
linux-mips
Subsystem:
mips, networking drivers, the rest · Maintainers:
Thomas Bogendoerfer, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
When a DMA channel is opened the IRQ should not get activated automatically, this allows it to pull data out manually without the help of interrupts. This is needed for a workaround in the vrx200 Ethernet driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- arch/mips/lantiq/xway/dma.c | 1 - drivers/net/ethernet/lantiq_etop.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 4b9fbb6744ad..3a90bb4edacc 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c@@ -106,7 +106,6 @@ ltq_dma_open(struct ltq_dma_channel *ch) spin_lock_irqsave(<q_dma_lock, flag); ltq_dma_w32(ch->nr, LTQ_DMA_CS); ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL); - ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); spin_unlock_irqrestore(<q_dma_lock, flag); } EXPORT_SYMBOL_GPL(ltq_dma_open);
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index afc810069440..c978a857a25c 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c@@ -438,6 +438,7 @@ ltq_etop_open(struct net_device *dev) if (!IS_TX(i) && (!IS_RX(i))) continue; ltq_dma_open(&ch->dma); + ltq_dma_enable_irq(&ch->dma); napi_enable(&ch->napi); } phy_start(dev->phydev);
--
2.11.0