RE: [EXT] Re: [PATCH net] net: phylink: fix link state on phy-connect

The phylink_stop is called before phylink_disconnect_phy
You could see in mvpp2.c:

mvpp2_stop_dev() {
	phylink_stop(port->phylink); 
}

mvpp2_stop()       { 
	mvpp2_stop_dev(port);
	phylink_disconnect_phy(port->phylink);
}

.ndo_stop = mvpp2_stop,

-----Original Message-----
From: Russell King - ARM Linux [mailto:linux@armlinux.org.uk] 
Sent: Wednesday, November 29, 2017 11:21 PM
To: Yan Markman <redacted>
Cc: Antoine Tenart <redacted>; andrew@lunn.ch; f.fainelli@gmail.com; davem@davemloft.net; gregory.clement@free-electrons.com; thomas.petazzoni@free-electrons.com; miquel.raynal@free-electrons.com; Nadav Haklai <redacted>; mw@semihalf.com; Stefan Chulski <redacted>; netdev@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: Re: [EXT] Re: [PATCH net] net: phylink: fix link state on phy-connect

On Wed, Nov 29, 2017 at 09:06:56PM +0000, Yan Markman wrote:

The attached p21 patch doesn't change anything.
But another one from the mail-text is good
	void phylink_disconnect_phy(struct phylink *pl)
	+		pl->phy_state.link = false;

There still (not for my MRVL-PP2) problem:
	It is expected that on  ifconfig-down the callback
		pl->ops->mac_link_down(ndev, pl->link_an_mode); would be called, but 
it isn't

Are you calling phylink_stop() or are you just calling phylink_disconnect() ?

You must call phylink_stop() prior to phylink_disconnect().  This probably explains why the p21 patch did nothing.

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up According to speedtest.net: 8.21Mbps down 510kbps up