Re: [PATCH v0 01/10] arm: orion5x: Add required properties for orion-wdt to DT node
From: Andrew Lunn <andrew@lunn.ch>
Date: 2016-07-16 16:04:07
Also in:
linux-arm-kernel, linux-devicetree, lkml
On Sat, Jul 16, 2016 at 03:28:59PM +0100, Jamie Lentin wrote:
orion-wdt refuses to start without these properties defined, so lift definitions out of kirkwood/dove.dtsi Signed-off-by: Jamie Lentin <redacted>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/orion5x.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index e1b6d2a..fbccfbb 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi@@ -144,9 +144,10 @@ wdt: wdt@20300 { compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; + reg = <0x20300 0x28>, <0x20108 0x4>; interrupt-parent = <&bridge_intc>; interrupts = <3>; + clocks = <&core_clk 0>; status = "okay"; };-- 2.8.1