[PATCH v0 08/10] net: phy: Try looking for a phy-handle property to find the OF node
From: Jamie Lentin <hidden>
Date: 2016-07-16 15:03:28
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
If PHY is registered via. a DSA switch, the MDIO bus the phy is on does not exist in devicetree, but there may be a reference to the PHY node on the physical MDIO bus to use. Signed-off-by: Jamie Lentin <redacted> --- drivers/net/phy/marvell.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 280e879..c2ca347 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c@@ -302,14 +302,24 @@ static int marvell_config_aneg(struct phy_device *phydev) */ static int marvell_of_reg_init(struct phy_device *phydev) { - const __be32 *paddr; + const __be32 *paddr = NULL; int len, i, saved_page, current_page, page_changed, ret; + struct device_node *phy_dn; + + if (phydev->mdio.dev.of_node) + paddr = of_get_property(phydev->mdio.dev.of_node, + "marvell,reg-init", &len); + else if (phydev->attached_dev->dev.of_node) { + /* A DSA slave-mii-bus has no OF node, but the PHY might */ + phy_dn = of_parse_phandle(phydev->attached_dev->dev.of_node, + "phy-handle", 0); + if (phy_dn) { + paddr = of_get_property(phy_dn, + "marvell,reg-init", &len); + of_node_put(phy_dn); + } + } - if (!phydev->mdio.dev.of_node) - return 0; - - paddr = of_get_property(phydev->mdio.dev.of_node, - "marvell,reg-init", &len); if (!paddr || len < (4 * sizeof(*paddr))) return 0;
--
2.8.1