Thread (25 messages) flat view 25 messages, 6 authors, 2016-06-30

Re: [RFC 6/7] dt-bindings: net: bgmac: add bindings documentation for bgmac

From: Jon Mason <hidden>
Date: 2016-06-30 22:04:12
Also in: lkml

On Thu, Jun 30, 2016 at 2:06 PM, Ray Jui [off-list ref] wrote:
Hi Jon,

On 6/28/2016 12:34 PM, Jon Mason wrote:
quoted
Signed-off-by: Jon Mason <redacted>
---
 .../devicetree/bindings/net/brcm,bgmac-enet.txt     | 21
+++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644
Documentation/devicetree/bindings/net/brcm,bgmac-enet.txt
diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-enet.txt
b/Documentation/devicetree/bindings/net/brcm,bgmac-enet.txt
new file mode 100644
index 0000000..efd36d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bgmac-enet.txt
@@ -0,0 +1,21 @@
+Broadcom GMAC Ethernet Controller Device Tree Bindings
+-------------------------------------------------------------
+
+Required properties:
+ - compatible: "brcm,bgmac-enet"
+ - reg:                Address and length of the GMAC registers,
+               Address and length of the GMAC IDM registers

As we know there will be additional optional register banks required for
some of the other SoCs that the current driver has not yet supported. In my
opinion, we should consider to make "reg-names" a mandatory property now and
map the register blocks based on names.

I think this will help to make our life easier in the future when new
optional SoC specific register blocks are added, such that we can map the
register blocks based on names instead of indices, which will change and be
different among different SoCs and will require much more complex logic in
the driver to deal with.
I don't have any objection to this.  I'll tweak the patches to do it by name.
quoted
+ - interrupts: Interrupt number
+
+Optional properties:
+- mac-address: mac address to be assigned to the device
+
+Examples:
+
+gmac0: enet@18022000 {
+       compatible = "brcm,bgmac-enet";
+       reg = <0x18022000 0x1000>,
+             <0x18110000 0x1000>;
+       interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+       status = "disabled";
+};
Btw, I think Rob Herring should be included in the review for device tree
binding document changes.
Thanks, I'll add him and the other DT maintainers when I send this out
as a "PATCH" shortly.

Thanks,
Jon
Thanks,

Ray
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help