Re: Micrel Phy KSZ8031 clock select setting in dts

Hello.

On 6/20/2016 3:08 PM, Oliver Graute wrote:

thx you both for confirming that. Can you tell me also if the clock
statement s fine in my dts?

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1>;
	phy-mode = "rmii";
	micrel,rmii-reference-clock-select-25-mhz;
	clocks,rmii-ref;

    You need:

	clocks = <&your_clock>;
	clock-names = "rmii-ref";

in the PHY node (not the MAC node as you did).

[...]

Best regards,

Oliver

MBR, Sergei