Thread (10 messages) flat view 10 messages, 5 authors, 2014-07-10

Re: [PATCH v2 1/2] ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2014-06-26 18:15:57
Also in: linux-arm-kernel, lkml

Hi Boris,

2014-06-26 3:13 GMT-07:00 Boris BREZILLON [off-list ref]:
Add ethernet-phy node and specify phy interrupt (connected to pin PB25).

The PHY address is not specified here because atmel have 2 different
designs
for its CPU modules: one is connecting PHYAD[0-2] pins to pull up resistors
(Embest design) and the other one is connection PHYAD0 to a pull up
resistor and PHYAD[1-2] to pull down resistors (Ronetix design).
As a result, Ronetix design will have its PHY available at address 0x1 and
Embest design at 0x7.
Let the net PHY core automatically detect the PHY address by scanning the
MDIO bus.
I though the compatible string was listed as a required property, but
it is not. The 'reg' property however is listed as required, although
the of_miodbus_register() works just fine without it, although that is
a Linux-specific implementation detail.
Define board specific delays to apply to RGMII signals.

Signed-off-by: Boris BREZILLON <redacted>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
quoted hunk ↗ jump to hunk
---
 arch/arm/boot/dts/sama5d3xcm.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index b0b1331..fc68bae 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -34,6 +34,21 @@

                        macb0: ethernet@f0028000 {
                                phy-mode = "rgmii";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               ethernet-phy {
+                                       interrupt-parent = <&pioB>;
+                                       interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                                       txen-skew-ps = <800>;
+                                       txc-skew-ps = <3000>;
+                                       rxdv-skew-ps = <400>;
+                                       rxc-skew-ps = <3000>;
+                                       rxd0-skew-ps = <400>;
+                                       rxd1-skew-ps = <400>;
+                                       rxd2-skew-ps = <400>;
+                                       rxd3-skew-ps = <400>;
+                               };
                        };

                        pmc: pmc@fffffc00 {
--
1.8.3.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


-- 
Florian
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help